Camera Digitizing System

Camera Digitizing System

Multiple patterns can be digitized in one shot and the software will automatically identify each pattern, internal lines, holes, notches and grain line, also the sewing line can be added easily just input the sew allowance. It is possible to modify patterns as required before pattern scanning.winda-2

This software can convert the digitized pieces directly to various CAD formats and standard AAMA DXF, in order to guarantee complete compatibility with other CAD system.

winda-2
Digitizer winda-2
Hardware Interface Baud Rate Output Rate Technology Power Requirements
RS-232 Serial Interface Up to 19,200 Up to 100pps Electromagenetic 200V-250V, 50HZ
Model Active Area (inch) Resolution Accuracy (mm)
WD-A4460C 44X60(A00) 2540LP1 0.20
WD-A3648C 48X36(A0) 2540LP1 0.20
WD-A3648S 48036(A0) 2540LP1 0.127
WD-A2436C 36X24(A1) 2540LP1 0.20
WD-A2436S 36X24(A1) 2540LP1 0.127
WD-A1824C 24X18(A2) 2540LP1 0.25
WD-A3DTAB 24X18(A2) 2540LP1 0.25
Pen Plotter
winda-3
Stand Cutting Plotter
winda-3

Feature

  • Comsumple parts just normal ball pen, insure the machine is cheap and convenient to use.
  • Unique technology in application of Bluetooth to transfer data to machine.
  • Ocuupied little space in the pattern room.
  • High speed, long time working, without any compromise on the quality and the reliability.
  • Well compatibility with other CAD system by hog] file.
Mode WD-P90
WD-PC90
WD-P120
WD-PC120
WD-P170
WD-PC170
WD-P190
WD-PC190
WD-P220
WD-PC220
Ploting Length No Limit No Limit No Limit No Limit No Limit
Max Paper Width 950mm 1220mm 1730mm 2000mm 2260m
Max Plotting/cutting Width 900mm
900mm
1200mm
1200mm
1700mm
1650mm
1900mm
1850mm
2200m
2150mm
Paper Feeding Roller,No Paper Receiver Roller, with Paper Receiver
The best distance of bluetooth transportation <100
The band of bluetooth transportation 115200bps
Plotting material Suitable for all kinds of marker, 40g-250g.
Cutting material lot to All kinds of garment sample paper,80g-200g
Max plotting speed 80cm/sec
Machine definition 025mm/step
Software definition 0.05mm/step
Utter precision 0.15%or0.1mm
Min character size 5mm*5mm
Repeat precision 50.2mm
Pen pressure 50g-200g
Acceleration 4g
Interface Serial port and parallel port auto identify
Driving method Stepping motor
Plotting frequency 15 times/sec
Power supply 110/250V 50-60HZ 120W(max)